Anisotropic Elastoplastic Behavior Formulation and Analysis of the Instability in the Large Deformations – A Numerical Modeling Study in Forming Processes
Résumé
This study focuses on investigating the elastoplastic behavior and predicting plastic instabilities that occur during the large deformations in the metal and alloy forming process.The behavior was modelled using a phenomenological model with velocity-independent plasticity.This model takes into account the various physical phenomena encountered in the cold forming of metal sheets, in particular the initial anisotropy of the material and work hardening.The resulting constitutive equations were written in an incremental form, and the behavior law was introduced in a three-dimensional kinematic framework based on a particular writing of the gradient tensor of the deformations and gradient of the velocities in the form of an upper triangular matrix.The results demonstrate that the observed behavior is contingent upon the selection of a rotating reference frame.The impact of the selection of a rotating reference frame on the response of the behavior law is considerable.However, for loads with minimal rotation, this influence is negligible.When analysing the instabilities, we tested various prediction to understand the conditions that lead to deformations and to compare these different instability criteria.As a case study, the forming limits curves were analyzed.
Citer ce document
Exporter : BibTeX · RIS (Zotero, Mendeley, EndNote)
Accès au document
Texte intégral archivé sur SPHAERO, en accès ouvert : lisible gratuitement en ligne après connexion. Le document reste aussi disponible à sa source. Se connecter
Voir l'article sur le site de la revueLicence et provenance
Licence : CC BY
Notice moissonnée depuis OpenAlex le 28/09/2026. Le document reste hébergé par sa source.
Voir le document à la source →