Accès ouvert · CC BY

INFLUENCE OF HEAT TREATMENTS ON THE MICROSTRUCTURE AND TENSILE BEHAVIOUR OF SELECTIVE LASER MELTING-PRODUCED TI-6AL-4V PARTS

Article scientifique 2016 Sciences de l'ingénieur et technologies Anglais

Résumé

In industry, post-process heat treatments of Ti-6Al-4V are performed with the aim of improving its tensile behaviour. While heat treatments of wrought Ti6Al4V have been standardised (e.g., Aerospace Material Specification H-81200), heat treatments of selective laser melting (SLM)-produced Ti-6Al-4V lacks research and understanding. Significant concern exists about SLM Ti6-Al-4V’s achievable ductility attributed to its martensitic (α’) phase. In this research, heat treatments at a range of temperatures are applied to SLM-produced Ti-6Al-4V tensile samples. Microstructural analysis (both optically and through electron backscatter diffraction) was used to identify links between heat treatments and microstructure. Subsequently, uniaxial tensile tests were performed to determine the respective tensile properties of all samples. Correlations in the data show a significant loss in strength with respect to an increase in annealing temperature due to grain growth, while no noticeable trend was observed for fracture strain with regard to annealing temperatures.Â

Citer ce document

Haar, G. M. T., Becker, T. H., & Blaine, D. C. (2016). INFLUENCE OF HEAT TREATMENTS ON THE MICROSTRUCTURE AND TENSILE BEHAVIOUR OF SELECTIVE LASER MELTING-PRODUCED TI-6AL-4V PARTS. https://doi.org/10.7166/27-3-1663

Exporter : BibTeX · RIS (Zotero, Mendeley, EndNote)

Accès au document

Texte intégral archivé sur SPHAERO, en accès ouvert : lisible gratuitement en ligne après connexion. Le document reste aussi disponible à sa source. Se connecter

Voir l'article sur le site de la revue

Licence et provenance

Licence : CC BY

Notice moissonnée depuis OpenAlex le 25/08/2026. Le document reste hébergé par sa source.
Voir le document à la source →

Statistiques

Consultations (hors robots) : 11

Téléchargements (hors robots) : 0

Méthode de comptage