Accès ouvert · CC BY

Monitoring and optimization of machining process when turning of AISI316L based on response surface methodology, artificial neural network and desirability function.

Article scientifique 2023 Sciences de l'ingénieur et technologies Anglais

Résumé

Abstract The object of this research is to investigate the effect of cutting parameters such as cutting speed (Vc), feed rate (f) and depth of cut (ap) on machining parameters including cutting temperature (TC) and tool flank wear (VB) during dry turning of AISI 316L using coated carbide tool. The experiments were conducted according to Taguchi L27 orthogonal array, RSM and ANN have been used. Results revealed that (ap) found to be the dominant factor for TC. VB mainly influenced by Vc, f and ap, respectively. The prediction results obtained by ANN and RSM models showed a good agreement with experimental data. However, ANN models proved their capability to provide more accurate results compared to RSM models. According to the optimization analysis, Desirability function showed good accuracy in optimization.

Citer ce document

benkhelifa, O., Cherfia, A., & Nouioua, M. (2023). Monitoring and optimization of machining process when turning of AISI316L based on response surface methodology, artificial neural network and desirability function. Research Square. https://doi.org/10.21203/rs.3.rs-2463873/v1

Exporter : BibTeX · RIS (Zotero, Mendeley, EndNote)

Accès au document

Texte intégral archivé sur SPHAERO, en accès ouvert : lisible gratuitement en ligne après connexion. Le document reste aussi disponible à sa source. Se connecter

Voir l'article sur le site de la revue

Licence et provenance

Licence : CC BY

Notice moissonnée depuis OpenAlex le 10/09/2026. Le document reste hébergé par sa source.
Voir le document à la source →

Statistiques

Consultations (hors robots) : 10

Téléchargements (hors robots) : 0

Méthode de comptage