Accès ouvert · CC BY

Assessment of biofilm resistance, degree of conversion, and mechanical properties of nanomodified 3D-printed orthodontic clear aligner (in-vitro study)

Article scientifique 2026 Sciences de la santé Anglais

Résumé

BACKGROUND: Three-dimensional (3D)-printed orthodontic clear aligners represent a paradigm shift in malocclusion management; however, they remain susceptible to bacterial biofilm accumulation. Therefore, modification strategies that enhance resistance to biofilm accumulation without compromising mechanical performance are required. This study evaluated biofilm resistance, degree of conversion (DC%), flexural strength (FS), and surface microhardness (VHN) of commercially available 3D-printed clear aligner resin (CR) modified with nanozeolite (NZ) and chitosan nanoparticles (Chs NPs). METHODS: A total of 432 3D-printed specimens were fabricated and allocated into six groups: Group I (control): CR; Group II: (CR + 0.25 wt% NZ); Group III: (CR + 0.5 wt% NZ); Group IV: (CR + 0.25 wt% Chs NPs); Group V: (CR + 0.5 wt% Chs NPs); and Group VI (hybrid): (CR + 0.25 wt% NZ + 0.25 wt% Chs NPs). Surface topography and chemical characterization were performed using scanning electron microscopy (SEM) and Fourier-transform infrared spectroscopy (FTIR) for DC%. Biofilm resistance against Streptococcus mutans was assessed using a crystal violet assay by measuring optical density (OD) after 48-hour and 14-day incubation periods. FS and VHN were evaluated using a universal testing machine and a Vickers microhardness tester, respectively. All properties were evaluated before and after 14-day aging. Data were analyzed using two-way ANOVA and independent samples t-test with Bonferroni adjustment (α = 0.05). RESULTS: Two-way ANOVA indicated that the interaction between nanoparticle content and aging significantly influenced the DC%, OD, FS, and VHN values (p < 0.001). The 0.25 wt% NZ group showed the lowest OD after 48 h, whereas the 0.5 wt% NZ group showed the lowest OD after 14 days. The hybrid group demonstrated the highest FS and VHN values before and after aging. DC% values remained comparable among most groups, except for the 0.5 wt% Chs NPs group, which exhibited significantly lower DC% values before aging. Overall, the 0.5 wt% NZ group demonstrated the most favorable balance between reduced biofilm biomass and mechanical performance. CONCLUSIONS: Nanoparticle incorporation improves the functional properties of 3D-printed clear aligners. NZ-containing groups reduced Streptococcus mutans biofilm biomass while preserving acceptable mechanical performance, suggesting potential for development of biofilm-resistant aligner materials.

Citer ce document

Elnaggar, A. I., Fahmy, A. E., Hanafi, N. F., & Aboulgheit, S. (2026). Assessment of biofilm resistance, degree of conversion, and mechanical properties of nanomodified 3D-printed orthodontic clear aligner (in-vitro study). BMC Oral Health. https://doi.org/10.1186/s12903-026-09350-y

Exporter : BibTeX · RIS (Zotero, Mendeley, EndNote)

Accès au document

Texte intégral archivé sur SPHAERO, en accès ouvert : lisible gratuitement en ligne après connexion. Le document reste aussi disponible à sa source. Se connecter

Voir l'article sur le site de la revue

Licence et provenance

Licence : CC BY

Notice moissonnée depuis OpenAlex le 02/10/2026. Le document reste hébergé par sa source.
Voir le document à la source →

Statistiques

Consultations (hors robots) : 19

Téléchargements (hors robots) : 0

Méthode de comptage