Innovative sulfonated chitosan membranes: bridging the gap in fuel cell technology
Résumé
Abstract Chitosan, a natural polymer, is gaining attention for its low cost, hydrophilicity, and environmental benefits, making it a promising material for polyelectrolyte membranes (PEMs) in fuel cells (FCs). In this study, four membranes were fabricated using sulfonated chitosan combined with three sulfonated nanoparticles: sulfonated titanium dioxide (STiO 2 ), sulfonated silicon dioxide (SSiO 2 ), and sulfonated carbon nanotubes (SCNT) in varying ratios. The optimal membrane was prepared using a specific ratio of these components, cross-linked with 0.5% glutaraldehyde. While the electrochemical performance improved with increasing nanoparticle ratios, excessive nanoparticle content led to diminished results. The optimal membrane demonstrated excellent stability at 50 °C, achieving a maximum power density of 90 mW/cm 2 at 280 mA/cm 2 and a low cell resistance of 5.1 Ω cm 2 . Compared to the chitosan (CS)-based membranes in the literature, the optimal membrane exhibited superior ion exchange capacity, proton conductivity, mechanical stability, and lower water uptake, highlighting its potential as a sustainable and high-performance proton exchange membrane in fuel cell applications.
Citer ce document
Exporter : BibTeX · RIS (Zotero, Mendeley, EndNote)
Accès au document
Texte intégral archivé sur SPHAERO, en accès ouvert : lisible gratuitement en ligne après connexion. Le document reste aussi disponible à sa source. Se connecter
Voir l'article sur le site de la revueLicence et provenance
Licence : CC BY
Notice moissonnée depuis OpenAlex le 29/09/2026. Le document reste hébergé par sa source.
Voir le document à la source →