Accès ouvert · CC BY

Modeling of Machining Force in Hard Turning Process

Article scientifique 2018 Sciences de l'ingénieur et technologies Anglais

Résumé

In this work, we develop a modeling based on an Artificial Neural Network (ANN) and Multiple Linear Regression (MLR) to predict the machining force components generated during hard turning of a bearing steel with CBN cutting tool. The inputs of the ANN model were the cutting parameters (cutting speed, feed and depth-of-cut) and the workpiece hardness. The network training is performed by using experimental data. The optimal network architecture is determined after several simulations by Matlab Neural Network Toolbox. Back-propagation by Bayesian Regularization in combination with Levenberg–Marquardt algorithm is employed for training. The ANN approach is suitable to estimate the machining force components such as feed-force, radial-force and tangential-force; for this purpose, the results are compared to those obtained by experiment, and the maximum average MAPE value of 4.58 % was obtained for the machining force prediction. Also, the ANN results were compared to those obtained by MLR model. It was shown that the ANN model produced more successful results.DOI: http://dx.doi.org/10.5755/j01.mech.24.3.19146

Citer ce document

Makhfi, S., Haddouche, K., Bourdim, A., & Habak, M. (2018). Modeling of Machining Force in Hard Turning Process. Mechanika. https://doi.org/10.5755/j01.mech.24.3.19146

Exporter : BibTeX · RIS (Zotero, Mendeley, EndNote)

Accès au document

Texte intégral archivé sur SPHAERO, en accès ouvert : lisible gratuitement en ligne après connexion. Le document reste aussi disponible à sa source. Se connecter

Voir l'article sur le site de la revue

Licence et provenance

Licence : CC BY

Notice moissonnée depuis OpenAlex le 30/08/2026. Le document reste hébergé par sa source.
Voir le document à la source →

Statistiques

Consultations (hors robots) : 12

Téléchargements (hors robots) : 0

Méthode de comptage