Improving hydraulic fracturing effectiveness in depleted and low-pressure reservoirs using N2-energized fluids
Résumé
Abstract Foamed and energized fluids fracturing has been used in both conventional and unconventional reservoirs, as they reduce the amount of water used and hence minimize deleterious impact on water-sensitive formations. They also aid in the flow back after treatment in reservoirs where drawdown is limited. In this paper, the most important foam properties are presented, in addition, when to use energized fluids fracturing and how to choose the best energizing component with the best quality. The impact of N2-energized fluids fracturing (NEF) on wells that were previously fractured using conventional fracturing fluids is also presented. In addition, a comparison between the results of N2-energized fluids fractured and conventional fluid fractured wells is presented. The effect of using 20 to 50% (NEF) on production through surface well testing and live production data showed excellent and sustainable production rates. An economical study is presented through comparing the total capital cost of both NEF and conventional fluids fracturing, in addition to the hydrocarbon recovery of wells after both types. Data considered in this work represent about 40 wells fractured using NEF in the Egyptian Western Desert.
Citer ce document
Exporter : BibTeX · RIS (Zotero, Mendeley, EndNote)
Accès au document
Texte intégral archivé sur SPHAERO, en accès ouvert : lisible gratuitement en ligne après connexion. Le document reste aussi disponible à sa source. Se connecter
Voir l'article sur le site de la revueLicence et provenance
Licence : CC BY
Notice moissonnée depuis OpenAlex le 05/09/2026. Le document reste hébergé par sa source.
Voir le document à la source →