Accès ouvert · CC BY

Fabrication of polyhedral Cu–Zn oxide nanoparticles by dealloying and anodic oxidation of German silver alloy for photoelectrochemical water splitting

Article scientifique 2022 Sciences physiques et chimiques Anglais

Résumé

Abstract A significant effort has been dedicated to the synthesis of Cu–Zn oxide nanoparticles as a robust photocathode material for photoelectrochemical water splitting. Cu–Zn oxide nanoparticles were formed by controlled anodization of German silver (Cu–Zn–Ni) alloy in an aqueous electrolyte. Scanning electron microscopy (SEM) demonstrates the dependence of the obtained nanostructures on the anodization time. The X-ray diffraction (XRD) patterns showed the formation of copper oxide (CuO) and zinc oxide (ZnO) nanoparticles with good stability. This was also confirmed by the compositional X-ray photoelectron spectroscopy (XPS) analysis. The obtained polyhedral nanoparticles showed high optical activity with adequate bandgap energy. These optimized nanoparticles achieved boosted photocurrent of − 0.55 mA/cm2 at − 0.6 V vs. SCE under AM 1.5 illumination, confirming the role of the optimized dealloying and thermal treatment in tuning the photoelectrochemical performance of the material.

Citer ce document

Bahnasawy, N., Elbanna, A. M., Ramadan, M., & Allam, N. K. (2022). Fabrication of polyhedral Cu–Zn oxide nanoparticles by dealloying and anodic oxidation of German silver alloy for photoelectrochemical water splitting. Scientific Reports. https://doi.org/10.1038/s41598-022-21127-1

Exporter : BibTeX · RIS (Zotero, Mendeley, EndNote)

Accès au document

Texte intégral archivé sur SPHAERO, en accès ouvert : lisible gratuitement en ligne après connexion. Le document reste aussi disponible à sa source. Se connecter

Voir l'article sur le site de la revue

Licence et provenance

Licence : CC BY

Notice moissonnée depuis OpenAlex le 09/09/2026. Le document reste hébergé par sa source.
Voir le document à la source →

Statistiques

Consultations (hors robots) : 9

Téléchargements (hors robots) : 0

Méthode de comptage