Titanate–polyurethane–chitosan ternary nanocomposite as an efficient coating for steel against corrosion
Résumé
In this study, a titanate-polyurethane-chitosan ternary nanocomposite was prepared by physical mixing. Sodium titanate nanotubes (Na-TNTs) were prepared by the hydrothermal method, and chitosan was extracted from shrimp shell. Na-TNTs were mixed with polyurethane (PU) of different ratios by weight, and chitosan was added after optimization. All of the nanocomposite samples were characterized by field-emission scanning electron microscopy (FESEM), and the mechanical properties were investigated by abrasion, adhesion pull-off, impact resistance, and T-bending tests. The anticorrosion ability was tested by the salt spray method. The obtained results revealed that the binary composite of PU and 1.5% Na-TNTs exhibited remarkable anticorrosion activity among all the binary composites where the disbonded area 5% compared to blank PU 19% and adhesion 5.1 MPa compared to blank 3.5 MPa, while the ternary composite containing 4% chitosan exhibited the best anticorrosion activity where the disbonded area 2% and also exhibit better adhesion 7.9 MPa.
Citer ce document
Exporter : BibTeX · RIS (Zotero, Mendeley, EndNote)
Accès au document
Texte intégral archivé sur SPHAERO, en accès ouvert : lisible gratuitement en ligne après connexion. Le document reste aussi disponible à sa source. Se connecter
Voir l'article sur le site de la revueLicence et provenance
Licence : CC BY
Notice moissonnée depuis OpenAlex le 28/09/2026. Le document reste hébergé par sa source.
Voir le document à la source →