Accès ouvert · CC BY

Effects of Chemical, Thermal, and Hybrid Treatments of Ronier Fibers on the Mechanical Performance of Cement-Stabilized Lateritic Earth Blocks

Article scientifique 2026 Sciences de l'ingénieur et technologies Autre

Résumé

Natural fibers can improve the mechanical performance of Compressed Earth Blocks (CEBs), but their effectiveness depends on fiber treatment and dosage. This study investigates the effects of chemical, thermal, and hybrid (chemical-thermal) treatments of Ronier Fibers (RF) on the mechanical performance of cement-stabilized lateritic CEBs. Fiber properties such as geometry, water absorption, and mass loss were evaluated, along with lateritic soil and cement. Blocks with 0.25%, 0.5%, 0.75%, and 1.0% fiber by weight were produced and cured for 7, 14, and 28 days, and then tested for dry density, water absorption, and compressive strength. The results showed that all three treatments reduced water absorption and improved fiber–matrix interaction and crack bridging. Consequently, fiber-reinforced blocks generally exhibited better performance than the control blocks, with the magnitude of improvement depending on the treatment method and fiber dosage. The chemically and thermally treated fibers produced the best overall performance. At 28 days, blocks with 0.5% hybrid-treated fibers had a compressive strength of 4.90 ± 0.30 MPa (n=3), compared with 3.42 ± 0.235 MPa (n=3) for 0.5% untreated fibers, representing an increase of approximately 43%. In addition, water absorption dropped from 18.84 ± 0.466 % (n=3) for blocks reinforced with untreated fibers to 11.65 ± 0.346% (n=3) for blocks reinforced with hybrid-treated fibers at 0.5% dosage, a 38% reduction. An optimum fiber dosage of 0.5% was found; higher dosages reduced performance due to workability loss and fiber agglomeration. These results demonstrate the importance of optimizing both fiber treatment and dosage for cement-stabilized lateritic blocks. This study offers practical insights into the effective use of treated natural fibers for sustainable masonry.

Citer ce document

Segbamon, M. P. V., Arum, C., Mogire, P., & Odero, B. J. (2026). Effects of Chemical, Thermal, and Hybrid Treatments of Ronier Fibers on the Mechanical Performance of Cement-Stabilized Lateritic Earth Blocks. Engineering Technology & Applied Science Research. https://doi.org/10.48084/etasr.20107

Exporter : BibTeX · RIS (Zotero, Mendeley, EndNote)

Accès au document

Texte intégral archivé sur SPHAERO, en accès ouvert : lisible gratuitement en ligne après connexion. Le document reste aussi disponible à sa source. Se connecter

Voir l'article sur le site de la revue

Licence et provenance

Licence : CC BY

Notice moissonnée depuis OpenAlex le 12/10/2026. Le document reste hébergé par sa source.
Voir le document à la source →

Statistiques

Consultations (hors robots) : 11

Téléchargements (hors robots) : 0

Méthode de comptage