Accès ouvert · CC BY

Validation of the analytical Mix-kneader shaft design using finite element analysis

Article scientifique 2025 Sciences de l'ingénieur et technologies Anglais

Résumé

Abstract The purpose of this study was to carry out a numerical structural analysis of the Mix-kneader shaft using the Finite Element Method (FEM). The shaft model was built in SolidWorks and analyzed using ANSYS Workbench 2022 R2. Results showed a maximum deformation of 0.000052395 m, equivalent von-Mises stress of 51.48 MPa (25% of the 207 MPa yield strength of stainless steel 304), and a maximum shear stress of 10.65 MPa, significantly below the 51.75 MPa permissible shear limit. The factor of safety ranged between 1.67 and 5. A fatigue life of 3 million minutes (approx. 6 years) was predicted. These findings confirm the shaft’s design is structurally sound and reliable under operational loads, making it suitable for small-scale industrial soap processors in Uganda. This study contributes a validated FEM-based design approach for rotary shafts under combined torsion and bending loads.

Citer ce document

Kisuule, N., Kigozi, J., Tumutegyereize, P., Raymond, M., & Sempiira, J. E. (2025). Validation of the analytical Mix-kneader shaft design using finite element analysis. Discover Mechanical Engineering. https://doi.org/10.1007/s44245-025-00128-0

Exporter : BibTeX · RIS (Zotero, Mendeley, EndNote)

Accès au document

Texte intégral archivé sur SPHAERO, en accès ouvert : lisible gratuitement en ligne après connexion. Le document reste aussi disponible à sa source. Se connecter

Voir l'article sur le site de la revue

Licence et provenance

Licence : CC BY

Notice moissonnée depuis OpenAlex le 29/09/2026. Le document reste hébergé par sa source.
Voir le document à la source →

Statistiques

Consultations (hors robots) : 14

Téléchargements (hors robots) : 0

Méthode de comptage