Realistic Evaluation of Reinforcement Bond Strength in Alkali-Activated Slag Concrete Exposed to Elevated Temperature
Résumé
Abstract Alkali-activated concrete (AAC) has attained great popularity since finding it as an alternative to Portland cement concrete due to its superior characteristics in terms of mechanical properties and durability, and its low negative environmental impact. This research investigated both experimentally and analytically the bond behavior between alkali-activated slag concrete (AASC) and steel rebars considering some important parameters (rebar diameter and development length-to-diameter ratio) before and after exposure to elevated temperature using beam-end bond testing technique. The obtained experimental results were compared with those obtained from applying the CEB-FIP model and the well-known available equations in the literature. A modified model was proposed for predicting the bond behavior of AASC. Results have showed that the CEB-FIP model provides more conservative values for bond strength compared to the experimentally obtained results which increases the safety level when estimating the bond strength for design purposes. The proposed modified model achieved a higher correlation with the experimental results than the CEB-FIP model at ambient temperature.
Citer ce document
Exporter : BibTeX · RIS (Zotero, Mendeley, EndNote)
Accès au document
Texte intégral archivé sur SPHAERO, en accès ouvert : lisible gratuitement en ligne après connexion. Le document reste aussi disponible à sa source. Se connecter
Voir l'article sur le site de la revueLicence et provenance
Licence : CC BY
Notice moissonnée depuis OpenAlex le 26/09/2026. Le document reste hébergé par sa source.
Voir le document à la source →