Accès ouvert · CC BY

A Planar Dual-Band UHF RFID Tag for Metallic Items

Article scientifique 2020 Sciences de l'ingénieur et technologies Anglais

Résumé

In this paper, a comparison of three tags based on modified patches for UHF RFID in terms of size and read range performances is proposed. The antenna structure consists of a patch with an open stub and a meander line for feeding. The tags are dedicated to being mounted on metallic items and to interoperate on dual-band frequencies (European and American UHF RFID frequency bands). Moreover, the structure of the antennas is planar without any via holes or multilayers for a low cost and easy fabrication. Good agreement between simulation and experimental results has been obtained at 866 MHz and 915 MHz.

Citer ce document

Bouazza, H., Lázaro, A., Bouya, M., & Hadjoudja, A. (2020). A Planar Dual-Band UHF RFID Tag for Metallic Items. Radioengineering. https://doi.org/10.13164/re.2020.0504

Exporter : BibTeX · RIS (Zotero, Mendeley, EndNote)

Accès au document

Texte intégral archivé sur SPHAERO, en accès ouvert : lisible gratuitement en ligne après connexion. Le document reste aussi disponible à sa source. Se connecter

Voir l'article sur le site de la revue

Licence et provenance

Licence : CC BY

Notice moissonnée depuis OpenAlex le 04/09/2026. Le document reste hébergé par sa source.
Voir le document à la source →

Statistiques

Consultations (hors robots) : 16

Téléchargements (hors robots) : 0

Méthode de comptage