Accès ouvert · CC BY

Laser additive manufacturing of 3D meshes for optical applications

Article scientifique 2018 Sciences de l'ingénieur et technologies › Technologies émergentes › Fabrication additive (OCDE 2.11) Anglais

Résumé

Selective laser melting (SLM) is a widely used additive manufacturing process that can be used for printing of intricate three dimensional (3D) metallic structures. Here we demonstrate the fabrication of titanium alloy Ti-6Al-4V alloy based 3D meshes with nodally-connected diamond like unit cells, with lattice spacing varying from 400 to 1000 microns. A Concept Laser M2 system equipped with laser that has a wavelength of 1075 nm, a constant beam spot size of 50μm and maximum power of 400W was used to manufacture the 3D meshes. These meshes act as optical shutters / directional transmitters and display interesting optical properties. A detailed optical characterisation was carried out and it was found that these structures can be optimised to act as scalable rotational shutters with high efficiencies and as angle selective transmission screens for protection against unwanted and dangerous radiations. The efficiency of fabricated lattice structures can be increased by enlarging the meshing size.

Citer ce document

Essa, K., Sabouri, A., Butt, H., Basuny, F. H., Ghazy, M., & El‐Sayed, M. A. (2018). Laser additive manufacturing of 3D meshes for optical applications. PLoS ONE. https://doi.org/10.1371/journal.pone.0192389

Exporter : BibTeX · RIS (Zotero, Mendeley, EndNote)

Accès au document

Texte intégral archivé sur SPHAERO, en accès ouvert : lisible gratuitement en ligne après connexion. Le document reste aussi disponible à sa source. Se connecter

Voir l'article sur le site de la revue

Licence et provenance

Licence : CC BY

Notice moissonnée depuis OpenAlex le 28/08/2026. Le document reste hébergé par sa source.
Voir le document à la source →

Statistiques

Consultations (hors robots) : 7

Téléchargements (hors robots) : 0

Méthode de comptage