Accès ouvert · CC BY

The impact of submerged friction stir processing on the friction stir welded dissimilar joints

Article scientifique 2020 Sciences de l'ingénieur et technologies Anglais

Résumé

Abstract The submerged friction stir processing (SFSP) technique was employed on the prior friction stir welded (FSW) AA6082/AA8011 dissimilar aluminum alloy joints. The tap water with room temperature was kept at 40 mm depth throughout the processing. The AA6082 was kept at the advancing side during FSW and SFSP process and this was done to enhance the strength of the joint. The SFSP joints were studied comparatively with the FSW joints. The sampling position was also studied for both the FSW joint and SFSP joint. The employment of the submerged friction stir processing resulted in the microstructural grain size refinement. The tensile strength of the SFSP joint was found to be higher than that of AA8011 base metal but lower than that of AA6082 base metal. The tensile strength of the FSW joint was found to be lower than that of both base metals. There was a clear correlation between the tensile properties and the grain size refinement. The SFSP joint exhibited good microhardness properties compared to the FSW joint.

Citer ce document

Mabuwa, S., & Msomi, V. (2020). The impact of submerged friction stir processing on the friction stir welded dissimilar joints. Materials Research Express. https://doi.org/10.1088/2053-1591/abb6b6

Exporter : BibTeX · RIS (Zotero, Mendeley, EndNote)

Accès au document

Texte intégral archivé sur SPHAERO, en accès ouvert : lisible gratuitement en ligne après connexion. Le document reste aussi disponible à sa source. Se connecter

Voir l'article sur le site de la revue

Licence et provenance

Licence : CC BY

Notice moissonnée depuis OpenAlex le 04/09/2026. Le document reste hébergé par sa source.
Voir le document à la source →

Statistiques

Consultations (hors robots) : 12

Téléchargements (hors robots) : 0

Méthode de comptage