Accès ouvert · CC BY

Investigation of mechanical properties and performance of automotive brake pads

Article scientifique 2025 Sciences de l'ingénieur et technologies Anglais

Résumé

This study evaluates the performance of three powder metallurgy-based brake pad formulations (BP1, BP2, and BP3) by examining mass loss, hardness, braking force, coefficient of friction (COF), noise, and vibration under 5 and 8 bar pressures. BP1 exhibited the highest braking force (640.99 N) and COF (0.3873) at 8 bars, with improvements of 7.7-13.6% and 4.4-6.8% over BP2 and BP3, respectively. However, this came with the highest mass loss (1.2 g/h), noise (17.5 dB), and vibration (0.743 m/s²), attributed to three-body abrasive wear from SiC and ZrO₂ particles.BP3 demonstrated the lowest mass loss (1.07 g/h, ~ 20% lower than BP1), noise (14.8 dB), and vibration (0.571 m/s²), making it suitable for quiet, long-life applications. BP2 showed balanced behavior across all parameters. Hardness values were 46 HRC (BP1), 38 HRC (BP2), and 44 HRC (BP3), aligning with observed braking forces and structural compactness.

Citer ce document

Essam, M. A., Abdeltawab, N. M., Shash, A. Y., & El-Sayed, M. M. (2025). Investigation of mechanical properties and performance of automotive brake pads. Scientific Reports. https://doi.org/10.1038/s41598-025-15116-3

Exporter : BibTeX · RIS (Zotero, Mendeley, EndNote)

Accès au document

Texte intégral archivé sur SPHAERO, en accès ouvert : lisible gratuitement en ligne après connexion. Le document reste aussi disponible à sa source. Se connecter

Voir l'article sur le site de la revue

Licence et provenance

Licence : CC BY

Notice moissonnée depuis OpenAlex le 29/09/2026. Le document reste hébergé par sa source.
Voir le document à la source →

Statistiques

Consultations (hors robots) : 9

Téléchargements (hors robots) : 0

Méthode de comptage