Accès ouvert · CC BY

(Co/Zn) Al2O4 nano catalyst for waste cooking oil catalytic cracking

Article scientifique 2022 Sciences de l'ingénieur et technologies Anglais

Résumé

Abstract The current work investigated the preparation of Nano-particles of Co/Zn Al2O4 as a catalyst via co-precipitation method. Several analyses, including BET, XRD, HRTEM, EDX, SEM, and FTIR, were used to characterize it. The analysis revealed that the prepared catalyst had an average surface area of 69.20 m2/g, a cross-sectional area of 16.2 m2/molecule, an average particle size of approximately 28 nm, and a pore size of 0.22 cm3/g. The prepared catalyst was used in a bio fuel synthesis process via thermo-catalytic cracking of waste cooking oil (WCO) in a single step batch reactor. Catalyst loading was tested with different weight percentage of 1.5%, 2%, and 2.5%. The pilot study revealed that the best conditions for optimizing bio jet fuel yield were 400 °C, a catalyst loading of 2%, and a reaction time of 30 min.The optimal cut-off from the distillation process of crude liquid bio fuel product which represents a fraction of bio-jet fuel was in the range from 150 to 240 °C.

Citer ce document

El-Araby, R., Ibrahim, M. A., Abdelkader, E., & Ismail, E. H. (2022). (Co/Zn) Al2O4 nano catalyst for waste cooking oil catalytic cracking. Scientific Reports. https://doi.org/10.1038/s41598-022-10596-z

Exporter : BibTeX · RIS (Zotero, Mendeley, EndNote)

Accès au document

Texte intégral archivé sur SPHAERO, en accès ouvert : lisible gratuitement en ligne après connexion. Le document reste aussi disponible à sa source. Se connecter

Voir l'article sur le site de la revue

Licence et provenance

Licence : CC BY

Notice moissonnée depuis OpenAlex le 06/09/2026. Le document reste hébergé par sa source.
Voir le document à la source →

Statistiques

Consultations (hors robots) : 10

Téléchargements (hors robots) : 0

Méthode de comptage