Accès ouvert · CC BY

ECG Generator for Educational Biomedical Engineering Laboratory

Article scientifique 2022 Sciences de l'ingénieur et technologies › Génie biomédical (OCDE 2.6) Anglais

Résumé

The aim of this work is to design and implement an ECG generator for didactic biomedical engineering laboratory. The proposed generator provides analog ECG signals using synthesized or experimental records. The technique used in this work consists to generate the desired ECG waveforms through the PWM outputs of an Arduino board and low-pass filter. To provide many educational functions in both analog instrumentation and digital processing, the generator supplies output voltages in asymmetric or differential mode. To allow the user to setup the ECG signal to be generated, a LabVIEW application has been implemented. Experimentations on proposed generator and results were accomplished using the NI USB 6009 acquisition module and NI MAX software.

Citer ce document

Aqil, M., & Jbari, A. (2022). ECG Generator for Educational Biomedical Engineering Laboratory. International Journal of Online and Biomedical Engineering (iJOE). https://doi.org/10.3991/ijoe.v18i02.25363

Exporter : BibTeX · RIS (Zotero, Mendeley, EndNote)

Accès au document

Texte intégral archivé sur SPHAERO, en accès ouvert : lisible gratuitement en ligne après connexion. Le document reste aussi disponible à sa source. Se connecter

Voir l'article sur le site de la revue

Licence et provenance

Licence : CC BY

Notice moissonnée depuis OpenAlex le 06/09/2026. Le document reste hébergé par sa source.
Voir le document à la source →

Statistiques

Consultations (hors robots) : 16

Téléchargements (hors robots) : 0

Méthode de comptage