Accès ouvert · CC BY

High mechanical properties performances of woven as a satin cloth type of long Alfa, Sisal and hybrid Alfa/Sisal fibers reinforced Epoxy

Article scientifique 2022 Sciences physiques et chimiques › Sciences des matériaux › Matériaux composites (OCDE 2.5) Anglais

Résumé

Abstract This study treats the mechanical behavior of composites, made of an epoxy resin matrix reinforced at 30% and 40% with a satin cloth type of long Alfa fibers, Sisal and hybrid Alfa/Sisal. The fibers are obtained by extraction with elimination of binders such as pectins and lignin. For each type of fibers, an appropriate and optimal chemical and thermal treatments duration are conducted within NaOH solution. FTIR, SEM and chemical decomposition of treated and untreated fibers leads to prove the efficiency of the treatment. Differential scanning calorimetry made it possible to quantify the enthalpy changes of materials as a function of temperature and TGA, DTG also showed better thermal stability. DSC showed an increase in the amount of heat as a function of the increase in volume fraction of fibers. The endothermic reaction of the studied composites containing 30wt% fiber reinforcement is lower than that containing 40wt% fiber reinforcement. The composite materials are performed by VARTM due to hydrophilic fibers nature. The results of static tensile, the 3-point bending and compression tests of different specimens were compared to those of the pure epoxy resin. It showed a significant increase in Young's modulus. Best results are shown for 40wt% woven Alfa fibers/Epoxy of about 333%, 113%, and 81% on tensile, 3-points bending and compression tests respectively. The SEM morphology analysis of both untreated and treated fiber surfaces show clean and clearly visible fibers after alkali treatment and its breaking mechanism revealed good interfacial adhesion between the treated fiber and the matrix.

Citer ce document

Baali, B. R., Nour, A., Gherbi, M. T., Saci, R., Aguib, S., & Attia, N. (2022). High mechanical properties performances of woven as a satin cloth type of long Alfa, Sisal and hybrid Alfa/Sisal fibers reinforced Epoxy. Research Square. https://doi.org/10.21203/rs.3.rs-2283466/v1

Exporter : BibTeX · RIS (Zotero, Mendeley, EndNote)

Accès au document

Texte intégral archivé sur SPHAERO, en accès ouvert : lisible gratuitement en ligne après connexion. Le document reste aussi disponible à sa source. Se connecter

Voir l'article sur le site de la revue

Licence et provenance

Licence : CC BY

Notice moissonnée depuis OpenAlex le 10/09/2026. Le document reste hébergé par sa source.
Voir le document à la source →

Statistiques

Consultations (hors robots) : 12

Téléchargements (hors robots) : 0

Méthode de comptage