Accès ouvert · CC BY

Superhydrophobic functionalized cellulosic paper by copper hydroxide nanorods for oils purification

Article scientifique 2021 Sciences physiques et chimiques Anglais

Résumé

Abstract Oily water contamination has been sighted as one of the most global environmental pollution. Herein, copper hydroxide nanorods layer was constructed onto cellulosic filter paper surface cured with polydopamine, Ag nanoparticles, and Cu NPs through immersion method. This work has been aimed to produce a superhydrophobic and superoleophilic cellulosic filter paper. The structure, crystalline, and morphological properties of these modified cellulosic filter paper were investigated. Scanning electron microscope images confirmed that the modified surface was rougher compared with the pristine surface. The contact angle measurement confirmed the hydrophobic nature of these modified surfaces with a water contact angle of 169.7°. The absorption capacity was 8.2 g/g for diesel oil and the separation efficiency was higher than 99%. It was noted that the flux in the case of low viscosity solvent as n-hexane was 9663.5 Lm−2 h−1, while for the viscous oil as diesel was 1452.7 Lm−2 h−1.

Citer ce document

Belal, A. S., Nady, J. E., Shokry, A., Ebrahim, S., Soliman, M., & Khalil, M. (2021). Superhydrophobic functionalized cellulosic paper by copper hydroxide nanorods for oils purification. Scientific Reports. https://doi.org/10.1038/s41598-021-95784-z

Exporter : BibTeX · RIS (Zotero, Mendeley, EndNote)

Accès au document

Texte intégral archivé sur SPHAERO, en accès ouvert : lisible gratuitement en ligne après connexion. Le document reste aussi disponible à sa source. Se connecter

Voir l'article sur le site de la revue

Licence et provenance

Licence : CC BY

Notice moissonnée depuis OpenAlex le 05/09/2026. Le document reste hébergé par sa source.
Voir le document à la source →

Statistiques

Consultations (hors robots) : 12

Téléchargements (hors robots) : 0

Méthode de comptage