Accès ouvert · CC BY

An approach to optimize pre-annealing aging and anneal conditions to improve photovoltaic performance of perovskite solar cells

Article scientifique 2018 Sciences de l'ingénieur et technologies Anglais

Résumé

In this study, we reported a low-temperature, one-step solution process to fabricate perovskite solar cells using dehydrated lead acetate as the lead source. These perovskite films were aged at 200 s before thermal annealing at 90 °C for 5 min. Uniform perovskite films with lesser pinholes were obtained by this technique. The inverted planar (n-i-p) perovskite solar cell device resulted in a power conversion efficiency of 13%. A substantial finding was that the devices demonstrated high reproducibility. We also investigated the effect of annealing temperature on the optical and structural properties of the films and on the photovoltaic performances of the fabricated solar cell devices. For the aforementioned, a low-temperature, one-step solution process, the optimal temperature was achieved at 90 °C.

Citer ce document

Sanni, D. M., Chen, Y., Yerramilli, A. S., Ntsoenzok, E., Asare, J., Adeniji, S. A., Oyelade, O. V., Fashina, A. A., & Alford, T. L. (2018). An approach to optimize pre-annealing aging and anneal conditions to improve photovoltaic performance of perovskite solar cells. Materials for Renewable and Sustainable Energy. https://doi.org/10.1007/s40243-018-0139-3

Exporter : BibTeX · RIS (Zotero, Mendeley, EndNote)

Accès au document

Texte intégral archivé sur SPHAERO, en accès ouvert : lisible gratuitement en ligne après connexion. Le document reste aussi disponible à sa source. Se connecter

Voir l'article sur le site de la revue

Licence et provenance

Licence : CC BY

Notice moissonnée depuis OpenAlex le 31/08/2026. Le document reste hébergé par sa source.
Voir le document à la source →

Statistiques

Consultations (hors robots) : 14

Téléchargements (hors robots) : 0

Méthode de comptage