Rice husk silica blended fillers for engine mount application
Résumé
The functional properties of engine mounts largely depend on the rubber compound formulation. This study proposes the use of rice husk-derived silica (RHS) blended with carbon black (N772) as an effective and environmentally friendly substitute for fillers used in rubber engine mounts (REMs). CV-60 natural rubber was filled with the blended fillers at various ratios, and their compatibility for use as rubber engine mounts (REMs) was assessed. Grey Relational Analysis was utilised to determine the optimal blend loading levels for use in rubber engine mounts, resulting in 40 phr of N772 and 20 phr of RHS cured at 130 °C and 2.5 MPa for 20 min. The developed REMs and conventional REMs had low vibration data variation during the performance assessment. Their resonance transmissibility was 5.03 and 3.74, corresponding to natural frequencies of 24.27 Hz and 26.94 Hz, respectively. The RHS/N772 REMs had excellent damping characteristics and lower transmissibility in the isolation zone of the vibration isolation curve, which is outside of the resonant frequency region. The efficiency curves showed that the blended fillers are a better and more effective material for REMs at all frequencies, balancing static deflection and vibration isolation.
Citer ce document
Exporter : BibTeX · RIS (Zotero, Mendeley, EndNote)
Accès au document
Texte intégral archivé sur SPHAERO, en accès ouvert : lisible gratuitement en ligne après connexion. Le document reste aussi disponible à sa source. Se connecter
Voir l'article sur le site de la revueLicence et provenance
Licence : CC BY
Notice moissonnée depuis OpenAlex le 27/09/2026. Le document reste hébergé par sa source.
Voir le document à la source →