Accès ouvert · CC BY

Performance, characteristics, and microscopy of fabricated nanozirconia on the composite cement

Article scientifique 2022 Sciences de l'ingénieur et technologies Anglais

Résumé

Abstract This investigation aimed to study the influence of prepared nanozirconia particles (NZ) on the characteristics, microscopy, and photocatalytic efficiency of composite cement. The average crystallite size of prepared NZ is ≈ 7-15nm. Surface area, pore volume, and pore radius recorded using BET isotherm are 88.01m2/g, 0.12cm3/g, and 4.92nm respectively. The combined water (Wn) and gel/space ratio (X) increased upto 1.5% NZ, these values increased upto 3months than the neat paste. Compressive strength (CS), and bulk density (BD) increased upto 0.25% NZ, whereas the total porosity represented the lower values. Increasing the content of NZ to 0.50-1.00%, the CS decreased, but it nevertheless larger than neat-OPC paste. The correlation results between CS and X values of mix NZ1 represented the higher values than the data of other NZ-composite- pastes. Cement containing 1.5% NZ achieved the highest dye degradation% at 3,7, 28, 90days were 82.34%, 84.72%, 88.58%, 97.22% after 300min of UV-irradiation the photocatalytic degradation.

Citer ce document

Heikal, M., & Mohamed, S. F. (2022). Performance, characteristics, and microscopy of fabricated nanozirconia on the composite cement. Research Square. https://doi.org/10.21203/rs.3.rs-2365506/v1

Exporter : BibTeX · RIS (Zotero, Mendeley, EndNote)

Accès au document

Texte intégral archivé sur SPHAERO, en accès ouvert : lisible gratuitement en ligne après connexion. Le document reste aussi disponible à sa source. Se connecter

Voir l'article sur le site de la revue

Licence et provenance

Licence : CC BY

Notice moissonnée depuis OpenAlex le 10/09/2026. Le document reste hébergé par sa source.
Voir le document à la source →

Statistiques

Consultations (hors robots) : 11

Téléchargements (hors robots) : 0

Méthode de comptage