Accès ouvert · CC BY

HIGH CYCLE FATIGUE PERFORMANCE OF TI6AL4V(ELI) SPECIMENS PRODUCED WITH INHERENT LASER POWDER BED FUSION SURFACE ROUGHNESS

Article scientifique 2021 Sciences de l'ingénieur et technologies Anglais

Résumé

This study investigated how surface defects affect the fatigue performance of laser powder bed fusion (LPBF) Ti6Al4V(ELI) test specimens in as-built surface roughness and heat-treated conditions. Tensile and fatigue specimens were built in three orthogonal directions for testing. Fatigue testing was carried out to determine the maximum stress at which a run-out number of 5 million cycles to failure could be achieved. Fractured specimens were analysed and compared for crack initiation and propagation characteristics using scanning electron microscopy. Conclusions were drawn on the possibility of producing Ti6Al4V(ELI) aircraft components through LPBF.

Citer ce document

Miya, H. P., Preez, W. D., & Monaheng, L. F. (2021). HIGH CYCLE FATIGUE PERFORMANCE OF TI6AL4V(ELI) SPECIMENS PRODUCED WITH INHERENT LASER POWDER BED FUSION SURFACE ROUGHNESS. The South African Journal of Industrial Engineering. https://doi.org/10.7166/32-3-2659

Exporter : BibTeX · RIS (Zotero, Mendeley, EndNote)

Accès au document

Texte intégral archivé sur SPHAERO, en accès ouvert : lisible gratuitement en ligne après connexion. Le document reste aussi disponible à sa source. Se connecter

Voir l'article sur le site de la revue

Licence et provenance

Licence : CC BY

Notice moissonnée depuis OpenAlex le 05/09/2026. Le document reste hébergé par sa source.
Voir le document à la source →

Statistiques

Consultations (hors robots) : 12

Téléchargements (hors robots) : 0

Méthode de comptage