Experimental Evaluation of Croton Megalocarpus Oil as a Bio-Based Cutting Fluid in Turning Inconel 718 Alloys
Résumé
The use of conventional petroleum-based cutting fluids poses significant environmental and occupational health concerns, highlighting the need for biodegradable alternatives in modern manufacturing. Exposure to cutting-fluid mists and volatile compounds generated during machining can cause respiratory irritation, skin disorders, and asthma. This study investigated the performance of Croton megalocarpus oil as a bio-based cutting fluid for machining Inconel 718. The performance of three cutting fluids was compared: conventional mineral cutting oil, filtered Croton megalocarpus base oil, and Croton megalocarpus oil containing 0.5 wt% graphene nanoparticles. Turning experiments were conducted on a TSL-550D precision lathe under identical machining conditions for all three fluids. The results showed that pure Croton oil reduced the cutting temperature to 160 ℃, representing a 5.3% reduction compared with mineral oil (169 ℃). The graphene-enhanced Croton oil provided the greatest reduction in cutting temperature, with a mean value of 136 ℃, corresponding to a 19.5% reduction relative to mineral oil. It also produced the lowest surface roughness (1.68 μm), compared with 1.72 μm for pure Croton oil and 1.70 μm for mineral oil. These results indicate that graphene-enhanced Croton megalocarpus oil has potential as a bio-based alternative to conventional mineral cutting fluids for machining Inconel 718.
Citer ce document
Exporter : BibTeX · RIS (Zotero, Mendeley, EndNote)
Accès au document
Texte intégral archivé sur SPHAERO, en accès ouvert : lisible gratuitement en ligne après connexion. Le document reste aussi disponible à sa source. Se connecter
Voir l'article sur le site de la revueLicence et provenance
Licence : CC BY
Notice moissonnée depuis OpenAlex le 12/10/2026. Le document reste hébergé par sa source.
Voir le document à la source →