Accès ouvert · CC BY

Engineering a poly(methyl methacrylate)–sodium mordenite hybrid composite for efficient adsorptive removal of indigo dye from aqueous media

Article scientifique 2026 Sciences de la Terre et de l'environnement › Sciences de l'environnement (OCDE 1.5) Anglais

Résumé

Abstract A poly(methyl methacrylate)-modified sodium mordenite (PMMA–Na-MOR) composite was prepared by in situ polymerization and evaluated for indigo removal under controlled batch conditions. FTIR, SEM, XPS, XRD, zeta-potential, BET surface-area, and pore-size-distribution measurements were used to examine polymer-associated surface modification, framework retention, interfacial charge, and accessible porosity. Quantitative PMMA loading was not determined and is identified as a limitation. Dye uptake approached equilibrium within approximately 90 min and was favored under near-neutral to mildly alkaline conditions. Increasing temperature reduced adsorption, consistent with exothermic behavior. Among the tested equilibrium models, Sips provided the best fit in the original qₑ domain (R² = 0.999, RMSE = 0.128, χ² = 0.016), with a model-derived q max of 29.07 mg g⁻¹ and n S = 0.786; the Langmuir q max was 17.59 mg g⁻¹. Apparent thermodynamic analysis based on K d, app = qₑ/Cₑ yielded ΔH app = − 26.43 kJ mol⁻¹ and ΔS app = − 95.60 J mol⁻¹ K⁻¹. Because K d, app is conditional and dimensional, the positive ΔG app values are not interpreted as standard-state Gibbs energies. Removal remained above 80% in the presence of each tested salt, while removal efficiency declined from 92.4% in cycle 1 to 76.8% in cycle 5. In one real-effluent sample, PMMA–Na-MOR reduced the measured indigo concentration from 50 to 10 mg L⁻¹ under the stated batch conditions. These results support preliminary batch performance, while quantitative polymer loading, replicate-based inferential statistics, polymer-leaching assessment, extended regeneration, and fixed-bed validation remain necessary.

Citer ce document

AbouElleef, E. M., Ibrahim, M. S., Diab, M., El‐Sonbati, A., & Bdeir, H. A. (2026). Engineering a poly(methyl methacrylate)–sodium mordenite hybrid composite for efficient adsorptive removal of indigo dye from aqueous media. Scientific Reports. https://doi.org/10.1038/s41598-026-73793-0

Exporter : BibTeX · RIS (Zotero, Mendeley, EndNote)

Accès au document

Texte intégral archivé sur SPHAERO, en accès ouvert : lisible gratuitement en ligne après connexion. Le document reste aussi disponible à sa source. Se connecter

Voir l'article sur le site de la revue

Licence et provenance

Licence : CC BY

Notice moissonnée depuis OpenAlex le 09/11/2026. Le document reste hébergé par sa source.
Voir le document à la source →

Statistiques

Consultations (hors robots) : 9

Téléchargements (hors robots) : 0

Méthode de comptage