157 publication(s) trouvée(s)
Article scientifique
Mechanistic Exploration of Estrone Adsorption onto Chitosan Hydrogel Beads: Classical and Fractal-like Adsorption Kinetics and Isotherms Analysis
Abstract This study investigates the mechanistic behaviour of estrone (E1) adsorption onto chitosan hydrogel beads through the assessment of adsorption …
Article scientifique
Influence of process parameters of fused filament fabrication on the Tensile and Specific Strength of Carbon fiber-reinforced polyethylene terephthalate glycol polymer
Abstract Carbon fiber-reinforced polyethylene terephthalate glycol (PETG-CF) has emerged as a promising material for lightweight structural applications owing to its …
Article scientifique
Enhanced Structural, Optical and Magnetic Properties of Fe 3+ -doped ZnZrO 3 Perovskites Synthesized via Sol-Gel Route
Abstract Undoped and Fe-doped ZnZrO3 perovskites were synthesized by the sol-gel method to investigate the effect of Fe incorporation on …
Article scientifique
Fabrication and characterization of calcium phosphate-reinforced alginate/gelatin composite hydrogels with pH-dependent ciprofloxacin release behavior
Abstract Controlled drug delivery systems have been developed to overcome the challenges associated with conventional delivery systems. Among all drug …
Article scientifique
Passive film formation, stability, and breakdown in high-entropy alloys: a critical review of corrosion mechanisms and electrochemical performance
Abstract Corrosion remains a critical limitation in advanced engineering materials, particularly under aggressive and multi-environment conditions. High-entropy alloys (HEAs) have …
Article scientifique
Influence of mixed aqueous-alcoholic solvents on the physical properties of zinc oxide thin films deposited by a simple spray technique
Abstract The objective of this work is to investigate the effect of aqua-alcoholic solvents on the physical properties of zinc …
Article scientifique
Influence of post-heat treatment on the internal microstructure and mechanical behavior of 3D printed carbon fiber-reinforced PLA
Abstract The mechanical properties of components manufactured via fused filament fabrication (FFF) are significantly influenced by defects that occur during …
Article scientifique
Caesalpinia pulcherrima ash as a sustainable reinforcement in metallic biomaterials for biomedical applications: a review on mechanisms, compatibility, and prospects
Abstract Agro-waste-derived oxides are increasingly investigated as sustainable reinforcement phases in metal-matrix composites. However, their translation into biomedical metallic systems …
Article scientifique
Oxalic acid-crosslinked biochar–chitosan composite: a novel antibacterial material
Abstract The rise of antibiotic-resistant pathogens highlights the need for safe, sustainable antimicrobial materials capable of inhibiting clinically relevant bacteria …
Article scientifique
Ferromagnetic study of NdCaFeSnO 6 compound
Abstract We conducted the study of magnetic characterization of the newly synthesized double perovskite NdCaFeSnO 6 (NCFSO), obtained through a …
Article scientifique
Waste Beneficiated Kaolin Filter Cake: A Sustainable Adsorbent for Efficient Fluoride Removal from Contaminated Water
Abstract Fluoride contamination in water poses severe threats to human health, and low-cost, sustainable adsorbents are needed for efficient fluoride …
Article scientifique
Recyclable cellulose aerogel-supported ZnO/CeO 2 /g-C 3 N 4 ternary nanocomposite for enhanced adsorption and photocatalytic degradation of acetaminophen in water
Abstract Immobilizing photocatalysts on supports facilitates recovery and reuse while eliminating secondary water contamination from photocatalyst leaching. A zinc oxide …
Article scientifique
AI-driven hybrid modeling and GA-based optimization of polymer solution viscosity for enhanced oil recovery applications
Abstract Predicting the zero-shear viscosity ( η 0 ) of Partially Hydrolyzed Polyacrylamide (HPAM)based polymer solutions is a key challenge …
Article scientifique
A review of 3D-printed architected polymer structures as reinforcement in cementitious applications
Abstract Additive manufacturing of architected polymer reinforcements is an emerging geometry-driven approach to improve the mechanical performance of cementitious materials. …
Article scientifique
Fabrication of economical refractory ceramics via local clay characterization and multi-response process optimization
Abstract This study establishes a robust framework for fabricating high-performance refractory ceramics from locally sourced Ethiopian kaolinitic clay through a …
Article scientifique
Cyclic-step quenching of micro-alloyed steel for enhancing mechanical properties: a novel heat treatment process implementation
Abstract This work carried out a novel quench procedure known as cyclic-step quenching. A low-alloy low-carbon steel was prepared into …
Article scientifique
Investigations of the antioxidants, antidiabetics and antiviral potential against SARS-CoV-2 of gold functionalized carboxymethyl cellulose
Abstract A composite of gold and carboxymethyl cellulose (Au-CMC) was prepared from gold(III) chloride and the sodium salt of carboxymethyl …
Article scientifique
Modified polyethersulfone ultrafiltration membranes modified with citric acid crosslinked β-cyclodextrin for enhanced performance and azo dyes removal efficiency
Abstract Polyethersulfone (PES) polymer-based membranes with enhanced properties and performance were fabricated. A hydrophilic β-cyclodextrin (β-CD) crosslinked with citric acid …
Article scientifique
Density functional theory study of cobalt sulfide as a counter electrode material for dye-sensitized solar cells
Abstract Dye-sensitized solar cells (DSSCs) are viewed as potential substitutes for traditional silicon-based solar cells due to their affordability, impressive …
Article scientifique
Antibacterial efficacy of decorated carbon nanotubes by nano silver against pseudomonas aeruginosa
Abstract Carbon nanotubes (CNTs) are considered as a promising nanomaterial for a variety of applications. It has desirable physicochemical characteristics …