157 publication(s) trouvée(s)
Article scientifique
The effect of synthesis route on the photocatalytic performance of Ag-TiO2 using rhodamine b dyes, pesticides, and pharmaceutical waste as model pollutants
Abstract The use of noble metal loading such as Ag to improve the photocatalytic performance of TiO2 has been well …
Article scientifique
The role of Sn on microstructure, wear and corrosion properties of Al-5Zn-2.5Mg-1.6Cu-xSn alloy
Abstract In the present investigation, Al-5Zn-2.5Mg - 1.6Cu -xSn (x = 0.0, 0.2, 0.4, 0.6, 0.8, and 1.0 wt%) alloys …
Article scientifique
Investigation of the protection effect of ginger, tea tree and grapefruit essential oil extracts on mild steel in 0.5M H 2 SO 4 solution
Abstract Utilization of plant extracts for the corrosion protection of metallic alloys has increased significantly in the last few years. …
Article scientifique
Partial substitution of feldspar by alkaline-rich materials in the electrical porcelain insulator for reduction of processing temperature
Abstract Porcelain is the most widely used overhead power-line insulator. The demands for porcelain insulators have increased dramatically owing to …
Article scientifique
Effects of hybrid polyethylene terephthalate fibre and fly ash on mechanical properties of concrete
Abstract Cracked concrete is a problem due to several factors such as poor maintenance, insufficient reinforcement or steel corrosion leading …
Article scientifique
Theoretical investigation of the structural, optoelectronic, and the application of waste graphene oxide/polymer nanocomposite as a photosensitizer
Abstract The negligence of used waste polymers often results in the waste of resources and constitutes serious environmental pollutants. Therefore, …
Article scientifique
Photostability of benzodithiophene based polymer: effect of PC60BM and intermolecular interactions
Abstract Organic solar cells working under continuous light irradiation are prone to photo-induced degradation. Photostabilities of benzodithiophene-alt-2-decyltetradecyl substituted isoindigo (PBDTI-DT) …
Article scientifique
Barite concrete-based cement composites for 252Cf spontaneous neutron and 60Co/192Ir shielding based on Monte Carlo computation
Abstract Barite concrete composite materials have been investigated for 252Cf spontaneous neutron and 60Co/192Ir gamma sources’ shielding using Monte Carlo …
Article scientifique
Formulation of nanocellulosic fibres and particle fillers, and their mono and hybrid reinforced polymer composites
Abstract Finite element analysis was used to formulate novel models of both mono and hybrid nanocomposites, and, also to predict …
Article scientifique
Size dependent local field enhancement factor of CdSe based core@shell spherical nanoparticles
Abstract We investigated the size dependent local field enhancement factor (LFEF) of CdSe@Ag and CdSe@ZnSe@Ag core/shell spherical nanoparticles theoretically and …
Article scientifique
Computational study of pressurized tetragonal magnesium hydride (MgH4) as a potential candidate for high-temperature superconducting material
Abstract The dream of realizing room temperature superconductivity is one of the most challenging problems in condensed matter physics. Currently, …
Article scientifique
Copper and nickel co-doping effects on the structural, optical and electrical properties of tungsten trioxide nanoparticles prepared by co-precipitation technique
Abstract The pristine WO 3 (tungsten trioxide) and Cu/Ni Co-doped WO 3 nanoparticles were synthesized by the co-precipitation synthesis methods …
Article scientifique
Enhancement of mechanical properties of chitosan film by doping with sage extract-loaded niosomes
Abstract Chitosan films are increasingly being applied in the biomedical field owing to their biocompatibility, biodegradability, non-toxicity, mucoadhesive nature, hemostatic …
Article scientifique
Finite element analysis and experimental approaches of mono and hybrid nanocellulosic composites under tensile test
Due to a technical error, this article was incorrectly made available as an accepted manuscript and has been temporarily removed. …
Article scientifique
The influence of carbon potential after gas-carbonitriding on the microstructure and fatigue behavior of low alloyed steel
Abstract In this paper, the effects of gas-carbonitriding time on fatigue limit improvement of low alloy steel specimens were investigated …
Article scientifique
Effects of growth time on the material properties of CdTe/CdSe core/shell nanoparticles prepared by a facile wet chemical route
Abstract This study presents a facile synthetic approach used to prepare CdTe/CdSe core/shell nanoparticles (NPs). The effects of reaction time …
Article scientifique
The behavior of hydrothermally synthesized hematite nanorods prepared on spin coated seed layers
Abstract Herein we report on the effect of varied spin-coated seed layer concentrations of Iron (III) chloride hexahydrate (FeCl 3 …
Article scientifique
Improvement in the microhardness and corrosion behaviour of Ti-14Mn biomedical alloy by cold working
Abstract β -titanium alloys are essential in many applications, particularly biomedical applications. Ti-14Mn β -type alloy was produced using an …
Article scientifique
Binder-free fabricated CuFeS2 electrodes for supercapacitor applications
Abstract Copper iron sulfide (CFS) (chalcopyrite) thin-film electrodes have been synthesized for energy storage applications using the SILAR method without …
Article scientifique
Polymer assisted colloidal nanocrystal framework synthesis: sol-gel approach
Abstract The porous colloidal nanocrystal framework material was synthesized by sol-gel assembly followed by a self-propagation procedure. The characteristics of …