56
Publications
170
Auteurs uniques
0
Pays représentés
Publications
56 publication(s) trouvée(s)
Article scientifique
Modeling the Physics of Selective Laser Sintering Using the Discrete Element Method
Selective laser sintering (SLS) is a typical procedure in powder-based 3D printing technology that produces items with great accuracy and …
Article scientifique
Investigations of FFF Process Parameters for Printing UHMWPE / HAP + TiO2 Filament Prepared by A Developed Small-Scale Filament Extruder for Used in Biomedical Applications
Abstract The first aim of this work is to produce a small-scale filament extruder. The produced filament should be suitable …
Article scientifique
A review of 3D-printed architected polymer structures as reinforcement in cementitious applications
Abstract Additive manufacturing of architected polymer reinforcements is an emerging geometry-driven approach to improve the mechanical performance of cementitious materials. …
Article scientifique
Fused Deposition Modelling (FDM) and Selective Laser Sintering (SLS) as Indisputable Machines in Additive Manufacturing: A Review
The additive manufacturing process is one of the keys to advanced engineering manufacturing processes in this era of the Fourth …
Article scientifique
CHARACTERISATION OF BONE-REGENERATING SCAFFOLDS PRODUCED THROUGH LITHOGRAPHY-BASED CERAMIC MANUFACTURING
Lithography-based ceramic manufacturing (LCM) is an additive manufacturing (AM) technology that builds custom-designed, three-dimensional ceramic parts layer by layer. The …
Article scientifique
EVALUATING THE ACCURACY OF A DIGITAL CORRELATION SYSTEM TO PREDICT THE FATIGUE FAILURE OF ADDITIVELY MANUFACTURED PARTS
Internal defects that occur during the additive manufacturing process of direct metal laser sintering can have a significant influence on …
Article scientifique
USING TOPOLOGY OPTIMISATION TO INFLUENCE THE INFILL PLACEMENT OF FUSED DEPOSITION MODELLED PARTS
Additive manufacturing continues to see increased growth and adoption across various industries owing to technology improvements and increasing material options. …
Article scientifique
MONITORING FOR CRACKS IN METAL L-PBF USING GAS-BORNE ACOUSTIC EMISSION
Delaminations and cracks are detrimental phenomena that hinder the quality of the final product in metal additive manufacturing. The effective …
Article scientifique
Touch Hand 4.5: low-cost additive manufacturing prosthetic hand participated in Cybathlon 2020 ARM discipline
BACKGROUND: The Touch Hand 4.5 is a highly customisable prosthetic hand, which features an optimised modular design of the Touch …
Article scientifique
The Microstructure and the Wear Performance of High Carbon Ferrochrome Fecrv15 and Fecrv15+cr Manufacture Through Laser Additive Manufacturing on Steel Baseplate for Tillage Application
Article scientifique
MECHANICAL RECLAMATION OF WASTE SAND PRODUCED BY ADDITIVE MANUFACTURING PROCESSES
Metal casting manufacturers are increasingly adopting three-dimensional printing in their workflows as a way to remain competitive. Despite all the …
Article scientifique
TIME-DRIVEN ACTIVITY-BASED COSTING RELATED TO DIGITAL TWINNING IN ADDITIVE MANUFACTURING
Many businesses in the additive manufacturing industry have limited equipment capacity. This method of using time-driven activity-based costing in collaboration …
Article scientifique
INVESTIGATION OF ACOUSTIC EMISSION SIGNAL DURING LASER POWDER BED FUSION AT DIFFERENT OPERATING MODES
The increased use of metal additive manufacturing in production components makes quality control essential. The performance of parts produced by …
Article scientifique
INFLUENCE OF POWDER CHARACTERISTICS ON THE SPREADABILITY OF PRE-ALLOYED TUNGSTEN- CARBIDE COBALT
With rising interest in additive manufacturing (AM) techniques, there is an increased focus on research that evaluates critical parameters that …
Article scientifique
OPTIMISATION OF A RESIN-COATED CHROMITE SAND FOR RAPID SAND CASTING APPLICATIONS
Applications of three-dimensional printing (3DP) to sand casting have been well-established in the last two decades. The preferred raw material …
Article scientifique
INVESTIGATION OF THE PROPERTIES OF DIRECT ENERGY DEPOSITION ADDITIVE MANUFACTURED 304 STAINLESS STEEL
One of the main considerations in adopting the additive manufacturing (AM) technology is whether the material properties of the AM-produced …
Article scientifique
SYSTEM DEVELOPMENT FOR THE FIVE-AXIS EXTRUSION OF A PHOTOPOLYMER
The development of a novel method of additive manufacturing involving the support-free extrusion of a photopolymer is discussed. The objectives …
Article scientifique
DEVELOPMENT OF A METHOD OF ADDITIVE MANUFACTURING BY MATERIAL EXTRUSION ALONG THREE-DIMENSIONAL CURVES
A method of additive manufacturing (AM) for the extrusion of material along three-dimensional curves is proposed as an alternative to …
Article scientifique
ADDITIVE MANUFACTURING FOR SUSTAINABLE CUSTOM-DESIGNED IMPLANTS
Additive manufacturing (AM) has proven to be an attractive alternative manufacturing process compared with subtractive manufacturing (SM). Additive manufacturing has …
Article scientifique
Standard method for microCT-based additive manufacturing quality control 5: witness specimen analysis v2
MicroCT is a well known technique and is often used for non-destructive analysis of parts produced by additive manufacturing. This …